Wednesday, November 20, 2013

Miniature Swing Set in 1:4 (MSD) scale

As a 'treat' to myself (and Clover) for working hard for SGDC2013, I decided to take some time out for a personal project....a swing set for Clover! Been meaning to make one for like, forever, but given the scarcity and cost of materials here in SG, I've put this project aside. Recently, Daiso has re-stocked quite a lot of different wood materials, and so....a night and a morning later.....Clover has a new toy! XD

/rantmode on

FIRST OFF. NO TUTORIAL. NO PLANS. If ever I do come up with some (if that is at all possible with my attention span), it would be a paid one anyway, cos it is a lot of work. THAT IS ALL.

/rantmode off

I don't have a fixed way of doing stuff, seeing as how plenty of improvisation is necessary (mostly cos I mess up. A. LOT.), it all starts with a vague idea of what has to be done, vague measurements based on my favourite numbers, a cursory glance at google images, and powered by very little patience and a whole lot of tenacity.....it starts off.....



like this. YUH USELESS CRAP. I CANNOT DRAW TO SAVE MY LIFE. laugh at my primary school long division method, but yes, i'm even too pre-occupied to reach for my phone-calculator. :(

so. off to google.....and .....nada. I wanted something foldable thinking I could bring it out.....*manic laughter* SO MUCH FOR THAT. HOWEVER!!! it did throw up something interesting:

https://us.readersdigest.com/images/offer/fh/project_plans/pdf/FH01SEP_PatioChair.pdf

So. Since I have no fancy-shmancy woodworking tools nor a laser cutter *whines* I decided to wing it and modify it as I made it up in my head.....

this is what I had to work with. forgot to include sandpaper. protractor, right-angle L-shaped ruler/square (get 'em from greedbay or hardware stores), pencil, ruler, nippers/pliers (?!), pins, pin vise, small drill bits (DAISO!!!) and saw/mitre (need a new one :(, Art Friend )

mehhehe a vanity shot of how I arrange my bits *snort*. these are straws hot-glued onto the lid of a Daiso box :D

speaking of Daiso.....here're the materials I used. more for personal reference.

and a level (?) which holds my bank dongle-thingummies on my whiteboard for majority of the year :-/ ALSO FROM DAISO ROARRRRRRRRRRRRRR yuh my typing/worktable is not level :(

so I fudged up the chair bit, totally forgot that I had mentally made an earlier modification to it and only a few mins after I glued down the final planks, did I remember. :( By that time, it was near impossible to rip off the support planks without damaging it, and so,

NOTE TO SELF: PLEASE REMEMBER TO REVERSE THE SUPPORT BEAMS KTHXBYE

so it is a fixed-seat rather than a portable one SIGH. ANYWAY. if you don't understand what the above was about, no worries, cos this isn't meant to help anyone but myself HAWHAW *miserable groan*

while searching for those screw type eyepins at a jewellery findings place at Peoples' Park Centre, these handy little clasps seemed like a nice find, for 1 buck, buy 1-get-1-free, WOOOTAGE. WHY THE HELL NOT EH! Chain from my earlier beadworking-jewellery making days. FINALLY they get put to good use.

they're really fidgety and slippery though. takes quite a bit to work with. as for the loop holding up the seat, it's actually a headpin wedged between the two support beams.



if you're wondering what angles I used for the support, the 2 base angles are at 70 deg. eh. my fave number is 7, go figure. the hardest part was getting the damned swing level. ON MY UN-LEVEL TABLE. which I'd forgotten was, unlevel, that is. things went much smoother after I set it on the floor :-/ =_=""""

The whole contraption is about 40cm tall x 10inches x 28cm deep. I told you, I make do and make things up as I go along T-T Enforced every single glued section with pins. There's a technical term for this which evades me.....HALP!

All in all, pretty pleased with it. Waiting for the glue to dry for 24 hrs before I give it a coupla coats of wood varnish :)

YOU LIKE?????????????????????????????

(please excuse the manic tone, back from my weekly swim and the MONSTER MUNCHIES IS DRIVING ME NUTS) HORMONES RAWRRRRRRRRRRRRRRRRRRRRRRRR

p.s. OH YA only suffered 1 injury, forgot my thumb isn't impervious to pins.....lanced it and stupid thing took ages to stop bleeding, so I spent a number of minutes with my arm above my head this morning GYAAAA.

1 comment:

  1. The wooden climbing frames Shop is at the forefront of Wooden Swing And Slide Set outdoor play equipment manufacturing and distribution.

    ReplyDelete

Thanks for commenting! I read every single one, and appreciate them!